Home » Misc » Baby food squeeze pouch mold

Baby food squeeze pouch mold


Mom warns parents about food pouches after claims of discovering ‘mold’ causing her baby to get really sick

A MOM shared a warning with her fellow parents when she allegedly discovered mold inside her baby's food pouch.

This is certainly not the first time a devastated parent has used social media to share such warnings.

3

A mom discovered mold inside her baby's food pouch

3

The mold had been at the bottom, which she had not seen when she purchased it

A mom took to social media to claim her baby had gotten sick after eating from a Gerber baby food pouch.

As she showed off the allegedly moldy product, she alleged: "Warning! My first time buying these and my baby threw up nine times after eating a little over a half.

"We then noticed no expiration date and then this leaf/mold was stuck at the bottom."

The devoted mom had not seen the pouch had mold inside when she purchased it - she only found it after her baby had gotten sick.

The specific pouch was meant to be banana mango, and although it was a yellow mush, it was speckled with black chunks.

The Sun has reached out to Gerber for comment but didn't receive any at the time of publication.

Most read in Lifestyle

SIGN ME UP

I’m a farm girl — I showed off a day in my life & people are asking how to apply

ANIMAL INSTINCT

I'm a farm girl – I'm the owner so I wear a bikini to feed the animals

YOU GO GIRL

Mum hits back at trolls who reckon her tiny clothes are inappropriate

NO BRA-MA

I’m a 34B and my friend’s a 38GG - we wore the same top and both looked great

When someone asked her in the comment section if her baby was better, she responded: "Doctor said just to keep her hydrated.

"She’s still sick at 2 am and her sister who just had one taste of it is now sick as well. But hopefully better soon!"

To further prove the mom's claims, a follower told her: "My kid literally just ate the same one today but it did not look like that."

A second mom claimed: "My daughter got salmonella from these.

"She almost died, was in the children’s hospital for a little over a week when she was little over a year old. "

And a third alleged: "My baby girl got SO sick feeding her Gerber, we had to go to ER.

"We switched to HappyBaby Organics and haven’t had an issue since."

And a fourth mom suggested: "Always squish around to mix. If possible, take a taste of anything prepackaged to make sure it's safe before feeding."

This is not the first time a mom has claimed to have found mold inside her kid's baby food pouch.

Back in July 2021, Jessica Carter showed the moment after she had opened a new pouch of Beech Nuts veggies and mold "shot" out of it, landing on the counter.

A massive build-up of mold had taken the shape of the straw as it laid on the horrifying mess.

"Just a friendly PSA to check your pouches before you give them to your kids," the worried mom said in the video.

"This is MOLD that shot out of this one and it's definitely still in date."

Read More on The US Sun

The pouch had been stamped to expire in December 2021 and the video had been published in June.

Along with the video, the mom of two boys publicly shamed the baby food brand and wrote: "Do better."

3

She claimed her baby had gotten sick after ingesting it

Mold in Baby Food Pouches?

Claim

Photograph shows mold discovered in an Aldi baby food pouch.

Rating

Unknown

Like this fact check?

Reporting

On January 31 2019, the Facebook page “Mommin’ Over Everything” shared what appears to be a screenshot of a social media post showing mold purportedly found in Aldi Simply Natural baby food pouches:

Another version published on the same date by the Facebook page “Motherly Empire” received around 200,000 shares in the same timeframe.

Alongside three photographs of mold in a pouch of Simply Natural baby food, the screenshot of an unspecified post read:

Well I thought it would never happen to me BUT……no more pouches for Jade! She just got a mouth full of mold! (From Aldi in WS) *updated- expiration date on this was 12/2019*

Although the screenshot included an expiration date for the item, the original post was not linked and the age of the original claim was not known. Due to the story’s prominence across “mom” pages on Facebook, a number of commenters shared versions of the claim to Aldi USA’s Facebook page, but we were unable to locate any comment on this exact rumor.

Claims about mold in Aldi baby food pouches (or pouches of pureed food in general) were similar to long-circulating rumors about mold purportedly found in pouches of Capri Sun juices. In October 2018, a popular Facebook post about mold in Capri Sun pouches led to testing by the company, which subsequently found minute punctures in the drink packaging:

“A third party company came to the house to pick up the ‘sample’ & package the following day, then sent it to the lab for testing … They came back with the results a few days later and said there was a “micro-puncture” in the package allowing oxygen to enter the pouch and create the mold seen in the video/pictures.”

Did Rep. Alexandria Ocasio-Cortez S...

Please enable JavaScript

Did Rep. Alexandria Ocasio-Cortez Say ‘We Can Land on the Sun, We Just Have to Go at Night?’

Which is pretty much Capri Sun’s FAQ answer to the question of “Will the mold make my child sick?”

“We’re so sorry you encountered mold! It’s unpleasant, but it’s unlikely to make you or your child sick. Although it’s rare, it is possible for food mold to grow inside containers of preservative-free juice drinks if the pouch is compromised or punctured in any way on its journey from our facilities to your grocery stores. Even if the hole is microscopic and not visibly detectable, it can be exposed to air.”

As the company noted, mold can grow in sealed, perishable food and drinks if the packaging is punctured at any time after production. In a separate FAQ response, Capri Sun’s FAQ explains:

Imagine leaving a piece of fruit like an apple or a strawberry on your counter. After time exposed to the air, mold will grow. Although it’s rare, it is possible for food mold to grow inside containers of preservative-free juice drinks if the pouch is compromised or punctured in any way on its journey from our facilities to your grocery stores. Even if the hole is microscopic and not visibly detectable, it can be exposed to air. The mold is naturally-occurring, and we understand it’s unpleasant.

Although those answers specifically had to do with Capri Sun drinks, they also described the possibility that organic matter in pouches (versus glass jars or cans) could be contaminated in a less detectable manner throughout the supply chain. While small punctures in a pouch could go unnoticed, fruit and vegetable purees in glass jars were likelier to present with a broken seal or other obvious signal of contamination.

Aldi’s Simply Natural line was the subject of a similar finding of mold in its pouches in March 2017 in Missouri:

Other brands, including Plum organics, have dealt with mold issues before.

“When you twist it, it’s locked. It’s completely locked, that it hasn’t been opened prior. I also would squeeze to make sure there’s air,” Garrett said in advising parents on how to check pouches at home.

[Dietitian Tylane] Garrett said parents should do what they can to safeguard their kids. She said, however, there could be problems in manufacturing, transit, or in the store itself before the purchase is made … The local Aldi store manager told KY3 the store had not received any pouches from the supplier in the last three days. The pouches are not available at the store on Battlefield Road at Jefferson Avenue.

[In March 2017], Aldi issued this statement:

“ALDI takes the safety and integrity of the products we sell very seriously and our Little Journey baby line is no exception.

“Our Little Journey Organic Food Puree pouches are USDA certified organic and contain no artificial preservatives. While extremely rare, if a pouch is punctured and exposed to air, mold can grow. It was brought to our attention that this occurred with pouches that were available for purchase at our Springfield store located at 421 E. Battlefield. Out of an abundance of caution, we have removed all Little Journey Organic Food Puree pouches from our store shelves in the Springfield area.

“We sincerely regret any inconvenience or concern this situation may have caused. If a customer has any concerns about this product, we encourage them to visit their local Springfield ALDI store and we’ll gladly refund the purchase price of the Little Journey Organic Food Puree pouches.”

Once again, Aldi was not the only manufacturer to contend with mold complaints relating to pouch-based baby food. A consumer reports site featured a number of posts about mold in Gerber brand baby food pouches. In 2016, the Detroit Free Press reported that all baby food in pouches is vulnerable to mold growth. In 2014, a similarly viral claim involved mold in GoGo Squeeze applesauce, a complaint that arose about Mott’s in March 2017.

The circumstances under which the baby food pouch in the photographs was contaminated were not clear. However, the vulnerability of food packaged in that manner (squeeze pouches) has been well covered as a food safety issue. On occasion, pureed baby food and drinks sold in pouches developed mold due to very small punctures in the packaging. The risk is legitimate, but the circumstances of these photographs are still unknown.

Leading Food Container Mold Manufacturer

Food Container Mold FAQ

Go4mould has been manufacturing high quality molds for over a decade and has a presence in China as well as several other countries. Go4mould is widely recognized as one of the most reputable and reliable hardware suppliers in China. OEM . This blog post covers some of the most common inquiries we receive from plastic container suppliers and manufacturers. In addition, we will discuss the benefits of partnering with a reputable supplier like us. Check out the frequently asked questions below if you'd like to learn more. nine0009

1. What is a food container mold?

Food container mold is a type of mold that is used to create food containers. It is made up of a number of different parts, including the base, casting cavity, and mold release. The base is usually made of metal or plastic , and the mold cavity is created with a punch or die. A release agent is used to prevent material from sticking to the mold during the manufacturing process. nine0009

Figure 1. Food container mold

Food container molds are commonly made from a range of materials: silicon, glass, metals, polycarbonate and polypropylene. Polycarbonate, silicon, and metals are durable and heat resistant, making them ideal for use in food containers. Polypropylene and glass, on the other hand, are flexible and have a higher melting point, making them ideal for use in lids and other food contact applications. nine0009

2. What is the production process for making food container mold?

The food container mold production process includes a number of steps. First, a base and a casting cavity are created. Then a release agent is applied to the mold. Finally, injection food container into the mold and let cool.

The food container mold manufacturing process is relatively simple and can be completed in minutes. However, it is important to note that there are a number of factors that can affect the quality of the finished product, including Type plastic injection used, size and design mold cavity and the amount of time the food container remains to cool. When choosing a food container shape, it is important to consider all of these factors to ensure that the finished product is of the highest quality.

3. What are the most common applications for food containers?

Food containers used in various niche markets including food storage, food transportation and food packaging.

One of the most common uses for food containers is food storage. Food containers can be used to store both dry and wet food, and can also be used to store food in the refrigerator or freezer. Food containers can also be used to keep food fresh for a longer period of time by sealing in moisture and preventing air from entering. nine0009

Another common use for food containers is food transport. Food containers can be used to transport food from one place to another, as well as to keep food hot or cold during transport. Food containers can also be used to protect food from damage during transit, such as protection against bumps and bruises.

4. What materials are used in the production of food containers? nine0004

There are many different materials that can be used to make food containers. Some of the most common materials include plastic, glass, metal, and silicon. Each material has its advantages and disadvantages, and they can be used as tips when fermenting food container.

Plastic is a popular choice for food containers because it is lightweight and durable. However, plastic can release chemicals into food, so it's important to choose a safe plastic such as polypropylene or polyethylene terephthalate. nine0009

  • Glass is another common food container material. Glass is also non-reactive, so chemicals won't get into your food. However, glass breaks and is heavier than plastic, so it may not be the best choice for portable containers.
  • Metal containers are usually made of stainless steel or aluminium. They are durable and will not break like glass, but can be easily wrinkled and scratched. Metal containers can also conduct heat, so they are not ideal for storing hot food. nine0076
  • Silicon is a relatively new material that is gradually becoming more popular for food storage. Silicon is non-toxic, tasteless and odorless. Plus, it's flexible so it won't break like glass and has fewer dents or scratches than metal.
5. Are there different designs and colors of food containers?

There is a wide range of food containers on the market in various shapes and colors. Round, square and rectangular containers with lids are among the most common. nine0003 design p. Lids help keep food fresh by sealing in moisture and preventing air from entering. Colors can vary, but clear ones are the most common, making it easier to see what's inside. Design and size can be customized according to customer needs.

Figure 2. Various sizes and shapes of food containers

6. What other molds does Go4mould offer? nine0004

Yes, Go4mould offers a wide range of molds for different products. Other types of molds we provide include bottle cap molds, beer crate molds, medical plastic injection molds, bucket molds, and trash can molds.

7. How long does a food container mold usually keep?

Food container mold can usually last 300000 shots if cared for properly. However, it is important to note that the life of a food container mold will depend on a number of factors, including the material it is made from, the size of the mold cavity, and how much it is used. When choosing a food container shape, it is important to consider all of these factors to ensure that the finished product lasts as long as possible. nine0009

8. Who is the leading food container mold manufacturer and supplier in China?

Finding a reliable source of mold in China can be tricky. Introduce China's top manufacturer and food container mold supplier. Go4mould is China's premier plastic container mold manufacturer. Our molds are high precision and are made from steel, aluminum and plastic and are engineered to withstand significant wear. nine0009

When it comes to customer service, we recognize the importance of evaluating our customers. Therefore, Go4mould makes great efforts to guarantee the happiness and satisfaction of customers. Before delivering our products to consumers, they undergo comprehensive Testing in our factory to ensure they are of the highest quality.

9. How to place an order for food container mold from Go4mould?

Go4mould is a leading food container mold manufacturer. Go4mould offers a wide range of food container shapes so you can find the perfect shape for your needs. You can place an order for Go4mould's food container mold by visiting the Chestny ZNAK website, a physical visit, or by contacting our representative. nine0009

Baby food warmer CS Medica KIDS CS-25

CES Medica presents a novelty on the Russian market - baby food warmer CS Medica KIDS CS-25 . This is a device that is designed to quickly and gently heat bottles with liquid (milk or formula), as well as jars of baby food to a temperature comfortable for feeding a baby (approximately 37 ° C).

Using a warmer allows you to preserve the beneficial nutrients of milk and baby food, which is vital for the healthy development of the child. nine0009

It is important for mom to know that the baby's digestive system is sensitive not only to the consistency and quality of food, but also to its temperature. Requirements for proper nutrition of the baby: liquid or puree-like consistency, warm temperature, but not hot, close to the temperature of mother's milk.

Warmer CS Medica KIDS CS-25 will help mom get baby food at the optimum temperature.

Benefits of the CS Medica KIDS CS-25 baby food warmer: