Pigeon feeder baby bottle

Posted Dec 13 ‘22 09:42

useful tips benefit hobby idea

Did you like it?
Share with your friends!

Bird feeding teaches the little ones to take care of animals in difficult times. You can buy a feeder or make your own.

This combination of business and pleasure can be a wonderful activity. nine0005

It is worth teaching children to care for the environment from an early age. In winter, you can feed the birds together in a homemade bird feeder. There are many creative ideas you can try out at home with basic tools. Spending time creatively with your child will certainly strengthen family relationships. We have prepared some interesting proposals.

Creative Feeders Ideas List

There are many ways to create your own unique winter feeder for sparrows, tits and other birds. You can plan this work already for November, when it gets colder and it will be difficult for the animals to find food on their own. Making a feeder is also a great idea for spending autumn evenings with a child. Creative activities will certainly strengthen his bond with the teacher, but you can also use these ideas in the classroom at school or in the common room. nine0005

• Paper Roll Feeder - Few people know that toilet paper rolls are a great material to help prepare your bird feeder for the winter. To make it, you will need a roller, twine, scissors, peanut butter and a mixture of various bird seeds. Coat the outside of the toilet paper roll with thick peanut butter, then sprinkle with grains and hang on the tree. Due to the properties of paper, it is better to place such a feeder in a place where it is not damp and where there is less risk of getting wet in rain or snow. nine0023
• Bottle feeder - who said that an empty plastic bottle is useless? To prepare such a feeder, you will need one large 5 liter bottle, one smaller one (for example, 1.5 liters), plus scissors and electrical tape. Cut a hole in the large bottle so the birds can get in freely. The smaller one will serve as a dispenser - it is enough to properly attach it inside a larger bottle, and you can pour food on top of it. It is worth protecting the sharp edges of the bottles so that the birds do not get hurt. nine0023
• Mesh Feeder - Often garlic or other vegetables are packed in a large mesh mesh. You can easily turn them into a bird feeder - just tie the ends of the net with string and put your favorite bird treats inside. If they are too small, they can be additionally glued with something bold. At low temperatures, a self-prepared seed ball should not crumble. An alternative solution is to buy a ready-made seed ball and prepare a mesh feeder yourself. nine0023
• The wire feeder is simply a very simple yet effective design. Make an object out of the wire and stick pieces of fruit or other bird treats into the protruding ends. Children's imagination knows no bounds. Therefore, together with the child, you can make a heart or some kind of figurine on the New Year theme.

What to look for when choosing a bird feeder?

You can also find feeders in stores. In winter, they even appear in popular supermarkets. Increasingly, they seduce with their unique look and functionality. Be sure to provide birds with easy access to food. Sparrows and tits can be shy, so it's best to place the feeder a little further away from a window, balcony, or garden entrance. If a cat lives on the site, it is worth considering the location of the feeder. Although the birds are very fast and agile, the mere presence of a cat will prevent them from visiting the feeder. nine0005

Follow us on Zen

Add the "INFOX.life" feed to your personal and get the latest news daily

Subscribe

how to make with 2, hopper, step by step instructions, original ideas

Contents

• What tools and materials you need
• How to make a simple bird feeder out of a 5 liter plastic bottle
  • The simplest version of the feeder
  • All-weather model of a plastic feeder
  • Warm feeder
• How to make a bird feeder out of 2 bottles
• How to make a bird feeder out of a 1 or 1.5 liter bottle
• How to make an owl bird feeder out of a plastic bottle
• How make a hopper feeder for street birds from a plastic bottle
• How to make a horizontal bird feeder from a large plastic bottle
• Feeder for titmouse
• Design for the smallest
• Feeder for rainy weather
• Original and beautiful bird feeders made of plastic bottles
• Conclusion

Spring can be attributed to the most difficult period in the life of birds, frosts often occur, and most importantly, there are no autumn food reserves left at all. You can support the birds in several ways, for example, laying grain and seeds on the ground. The method is old, but not very effective, most of the birds that build nests in trees and save gardens do not really like to pick up from the ground, not to mention predators, rain and wind. A bird feeder made from a plastic bottle will be much more effective. It will take a maximum of a couple of hours to make complementary foods, and the effect is no worse than that of the factory one. nine0005

For tits, a plastic food bottle can be a real lifesaver

What tools and materials you need

There are several ways to build a hanging feeder. Most often, the bottle is cut vertically into two halves, each of which is simply nailed to the board. Such a homemade plastic bottle feeder is used for ground-feeding birds. Sparrows and pigeons are happy to use such complementary foods. They also need to be fed, if only so that large birds do not steal food from plastic bottles hung on fruit trees. nine0005

For starlings and titmouse, the main defenders of gardens and beds, a bird feeder from a bottle has to be made according to a slightly different scheme. Must be added:

• Hanger for attaching a plastic bottle to branches;
• High rim to keep food out of the wind;
• Side panels for rain protection.

At the same time, it is still necessary to correctly assess the size and capabilities of birds, large birds prefer to drive away smaller competitors. On the one hand, it’s good when there is top dressing for starlings, but you need to support all the birds. Small birds should have their own plastic bottle feeder. nine0005

The construction will require a minimum of tools, most often a sharp knife or scalpel, a marker and a stapler. From the materials you will need to buy adhesive tape, a strong shoe thread or dredge. If they plan to hang a plastic structure in an open place, it would be right to decorate and decorate it, so we stock up on paints and felt-tip pens.

How to make a simple bird feeder out of a 5 liter plastic bottle

Larger containers are easier to work with. The walls of a five-liter plastic bottle are more convenient to cut, the holes are more even. Therefore, for the first experiment, it is better to take a larger bottle, it is easiest to make a universal feeder from a five-liter bottle, designed for any birds that live in a city park or square in front of the house. nine0005

The simplest version of the feeder

This model is considered one of the most popular among younger students. And here's why: you can make a body of a bird feeder from a five-liter plastic bottle in just a couple of minutes, and devote the rest of the time to decorating and designing the structure.

You can make a feeding place for the birds in the following way:

• Thoroughly wash the plastic bottle, remove all chemical smells from the feeder, they scare the birds; nine0023
• On the opposite sides of the bottle, draw the contours of the window with a marker. The size of the opening for birds must be at least 120x100 mm;
• Cut holes in the plastic wall with a knife.

To make it convenient to hang the bottle on a branch in a cork, you need to make two or four holes, through which we pass a shoe thread or just a nylon thread. We tie it in a knot and hang the feeder from the bottle on a branch so that it is convenient to put food inside without spilling it. nine0005

Of course, before giving the feeding place to the birds, the bottle can be painted with paints, make the contours of the windows, draw the image of the doors and the roof. Design options for a plastic bottle are limited only by the designer's imagination.

All-weather model plastic feeder

Often the feeding house becomes the only shelter in rain or snow. The above model of a bird feeder from a 5 liter bottle has one significant drawback. The windows remain unprotected, so water, snow and wind flood the contents, often making them unusable. nine0005

Let's try to improve the design:

• When making windows, we will cut not completely along the contour, but in the shape of the letter U, the upper part will remain intact;
• Let's bend the plastic petal and heat the bending line with a hot object, you can use a hair dryer or iron.

As a result, a plastic canopy appeared on the bottle, protecting the entrance at least from rain and snow. The value of the bend must be selected experimentally, so that it is convenient to lay food for birds without touching the feeder. nine0005

Warm feeder

The fact that birds use a plastic bottle as a temporary shelter makes us think about how to make the interior more comfortable. At least insulate the feeder.

The recipe for insulation is quite simple:

• Initially, before cutting out windows, two strips of double-sided construction tape should be glued to the side walls;
• We wrap a plastic bottle with linen or jute cord; nine0023
• We cut out the windows, the cutting lines of the cord will need to be glued with PVA.

Warm bird feeder from a 5L plastic bottle is ready. To give it a finished look, you can add a couple of bunches from an old, but still intact broom. It looks quite interesting, and most importantly, it is convenient for the birds, you can sit on the top of the bottle while the feeder is occupied by competitors.

How to make a bird feeder out of 2 bottles with your own hands

The presence of protective visors over the windows is not always enough to reliably protect food from moisture. Especially in a situation where you want to save a large number of seeds and grains. In addition, the simultaneous laying out of a large supply of food in the feeder leads to rapid loss of feed, and often to breakage of the entire structure. nine0005

The situation can be corrected by using a composite feeder, assembled from two plastic bottles inserted into each other. The outer part is made of a five-liter container, a liter bottle is used for the internal drive.

Feeder assembly scheme is quite simple:

• In a five-liter bottle we cut out side windows, the width of the opening should not be less than the transverse dimension of a liter bottle;
• We remove the plugs from both blanks;
• We insert a plastic plate with a hard flat bottom inside the five-liter bottle, fasten it with a stapler to the walls; nine0023
• We insert a whole liter inside through the cut opening, raise it so that the necks of both containers are at the same level;
• A cut must be made on the inner container to remove the bottom. The cut line must coincide with the plane of the plate;
• We cut the liter according to the markup. Along the edge, you will need to make several shallow incisions-windows, 0.5-1 cm high. Through them, bird food will wake up on a plastic plate;
nine0022 It remains only to wrap a soft material - polyethylene or adhesive tape - on the neck of the inner liter so that it fits snugly into the neck of the five-liter container and is firmly held inside.

Fill in the bird food, screw on the cork, and you can attach the feeder to the branch. If a carrying handle has not been preserved on a plastic bottle, then it can be hung with a wire or threaded directly through the cork.

How to make a bird feeder from a 1 or 1.5 liter bottle

The simplest version can be made from a one and a half liter container in just one movement. It will be enough to make an oblique cut on a plastic bottle, and the feeder is ready.

To attach the food, you will have to make a couple of holes in the side wall, through which we tie the bird perch with wires. It remains only to remove the cork and pick up a suitable knot on the branch, put the feeder on it with a hole, and you can fill in the feed.

How to make an owl bird feeder out of a plastic bottle

A bird feeder doesn't have to be boring and uninteresting. The feeder can always be decorated in some object, animal or bird. For example, an owl.

Such bird feeders made of plastic bottles, photo, will help not only support the birds, but also decorate the garden and even cheer up the owners of the cottage.

The simplest version of the "owl" can be made according to the following method:

• We are looking for a plastic bottle with a diameter of 140-150 mm and a height of 350-400 mm. The given dimensions can be changed at your discretion, the main thing is that the proportions are preserved; nine0023
• From two bottles of 0.5 l, you need to make paws and cut out the wings. We attach the lower part to the neck with wire, the wings can be fixed with a stapler;
• Two old CDs and two corks will be needed to make huge owl eyes. We fasten them to a plastic bottle using carpentry screws with washers;
• From the back side of the body of the owl we cut out a window for the birds, place a plate inside and fill in the food.

Owl coloring is better to make it moderately bright, use more traditional green and yellow colors for summer. You can fix the feeder on a suspension or use a wooden rail nailed to the fence as a support. nine0005

How to make a hopper feeder for street birds from a plastic bottle

Usually stationary models for feeding songbirds are bought for a summer cottage, designed to be used for 5-10 years. You can, of course, make a feeder out of a plastic bottle every year, but not always and not everyone has the opportunity to spend time on crafts.

You can make a stationary feeder with your own hands from the same 1.5 l plastic container. One of these models is shown in the photo below. nine0005

In order to make food for starlings, you will need to stock up on scraps of boards or even slabs, find a plastic plate, a piece of galvanized perforated tape, a couple of self-tapping screws, a dozen nails.

Important! We use a plastic bottle with a rim profile on the walls, made to make it more convenient to hold the container. You can use others, but the quality of the design drops significantly.

It is recommended to make a feeder according to the following scheme:

• From the scraps of the board we knock down the supporting frame for the bunker. Can be made L-shaped or U-shaped. The latter option looks more reliable;
• Fasten the frame to the tree trunk. This is best done with a nylon cord;
• We install a plate with food on the bird platform;
• We cut off the bottom of a plastic bottle, put the grain and seeds inside, turn it over and put it with the neck on a plate;
• Next, the most difficult thing, adjust the position of the plastic bottle so that the bird food freely wakes up on the plate; nine0023
• We fix the position of the plastic hopper by hand, with a marker you need to make control points for marking.

It remains only to fix the container with tape and self-tapping screws and fill the feed inside the hopper for the birds to enjoy. The secret of this model lies in the fact that before the start of assembly, it is possible to accurately determine the position of the bunker tank relative to the plate. You can make the feeder in a different way, but it’s not a fact that the food will wake up from the bottle evenly, without traffic jams.

How to make a horizontal bird feeder from a large plastic bottle

Often, small liter and two-liter containers are simply not enough to feed the entire flock that has settled on the site. Birds in the struggle for food are often injured and often break the feeders made for them. In addition, rather large containers of 6-10 liters for drinking water can remain in the country, so it is possible to make a large bird "dining room".

The manufacturing process is as follows:

• First of all, you need to make windows, cut them out with scissors according to the standard scheme, the petals can be bent or cut off completely; nine0023
• We remove the cork completely as unnecessary;
• Next, you need to make a suspension, for this we use a polypropylene cord. We pass it through the extreme windows and tie it in the form of two loops;
• In order to make it convenient for the birds to feed from the edge, you need to make perches.

The simplest option is to pierce the walls in several places with a red-hot nail, then pull a wooden pin with a pointed end or a plastic PVC tube.

Since the bird feeder is made in a horizontal plane, it can only be fixed on a flat and relatively thick tree branch. In this case, it will be necessary to slightly stretch the suspension loops in opposite directions so that the bottle does not sway while feeding the birds. nine0005

Titmouse Feeder

It is well known that many birds are happy to eat more nutritious foods than grains and seeds. Especially titmouse, for which a piece of lard has been and remains a favorite delicacy.

It would seem, what problems, it would be possible to tie a piece on a thread, and the birds themselves will figure it out. In fact, this is a bad idea, the feeder must be protected from predators, and most importantly, the process of feeding birds must be safe. nine0005

The simplest option is to use an ordinary plastic bottle feeder:

• We cut out not four windows in the body, but only two;
• We fall asleep inside millet and seeds;
• A through hole must be made in the bottle 4-5 cm above the level of the main food;
• We put a piece of bacon inside and pierce it with a pointed wooden twig.

For those who want to make the titmouse feeder more stylish, it is advisable to experiment with the shape of the window. A round or rectangular shape can be replaced with a more elegant option, for example, make an oriental-style edge, as in the photo. nine0005

Design for the smallest birds

The main problem with feeding small birds is the inconvenient shape of the bottle window. In order for the birds to feel confident, there should be several perches around the feeder so that they can sit out and wait their turn.

The problem is solved by installing additional places to rest:

• We make a couple of through holes in the bottom of the plastic feeder;
• We hammer two additional rods with a cross; nine0023
• We put on two necks from liter bottles for each pin and fasten them with a stapler to a wooden base;
• Pour food inside.

The projection of the wooden twig must be 4-5 cm longer than the neck. It turns out a very simple plastic design for feeding four birds at once. It is clear that this option requires protection from rain, so it is best suited for installation under a canopy or roof overhang.

Rain feeder

If the weather forecast indicates heavy and frequent rains next summer, it is best to start a protected feeding option right away. The scheme is no different from previous models, with the exception of a small addition in the form of a rain cap.

The structure is assembled in the following order:

• We use a polypropylene fruit bowl as a cap, cut off the bottom part;
• In the same way, cut off the bottom of a liter plastic bottle; nine0023
• We sew a through hole along the cut line of the bottom of the cap and container, into which we insert a metal pin or nail;
• It is very convenient to make a plate for feeding birds from the cut bottom.

A plastic dairy or juice bottle is best for this design, a standard PET soda or cola bottle has a too narrow neck.

Learn more

• 
  2 years baby weight gain food
• 
  Healthy food for baby shower
• 
  What kind of baby food does wic cover
• 
  Beechnut baby food jar crafts
• 
  Feeding for premature babies
• 
  Fresh starts baby food mill
• 
  Mothers feeding babies videos
• 
  How long can baby birds go without food
• 
  Healthy food for baby of one year
• 
  Feeding advice for babies
• 
  What kind of baby food does wic cover